User ManualST7610-4S-WBCVersion:2.0 (April, 2009)
Hardware Installation Procedure G. Two ST7610 units serially connected each other9Computer Back Panel JBOD Raid 01394bUSB 2.0 JBOD Raid
Hardware Installation Procedure105. Never use any of the following methods for serial connection A. In different modes, do not connect two 1394b cabl
Hard Disk Drive Format Procedure111. In the four individual Hard Disk Drives modes, the installed devices can be detected by the Device Manager of t
12Hard Disk Drive Format Procedure
Hard Disk Drive Format Procedure13 B. Operating Instructions for Macintosh After the hardware installation for the ST7610 is completed, you can re
Hard Disk Drive Format Procedure14
Hard Disk Drive Format Procedure C.Partition Select the disk you wish to partition and the Partition tab. Click the volume name displayed in th
1. Operating Instructions for Windows OS GearTANK ST7610-4S-WBC can be set up as a highly efficient RAID system in an operating system. To set up a
B. Select the RAID tab. If the disk device is ready, the disk information will be displayed on the left window. Please select the Volume Format
C. Drag disks or volumes to the list box to create the hard disk drives according to the definition of RAID. D. Select “Create” to create RAID sy
Check Package Contents and Accessories... 2Hardware Introduction...
E. When the format is completed, you will have a highly efficient RAID system featured with ST7610-4S-WBC. You can then access the data through
1. Most of the GearRAID series are the RAID series. Customers may set up different RAID levels without adding any other peripherals. Please refer t
Q: Does it need additional drivers to run GearTANK ST7610 in different operating systems?A: No. Users do not need any additional driver to run GearTAN
Q: How to identify the OS supports the USB interface.A: 1. Supported by Macintosh operating systems All Macintosh computers (iMac and Blue and Whit
Q: How to check if the USB ports of your PC are activated.A: USB is included in Windows 98 and XP/2000/2003; however, some computer manufacturers ma
Please check above parts are included prior to installation.The accessories bag contains screws and a plastic key.Status Indications of LEDs: ACCESS
3Precautions prior to InstallationPrecautions prior to Installation1. Before installation, please refer to the Check Package Contents and Accessories
4Hardware Installation Procedure1. After verifying that the package is complete, proceed to unpack the package.2. Hardware Installation. A. Insert th
5Hardware Installation Procedure D.Carefully push the removable tray into the slot and push the handle back into place.3. Use Mode and Connection Wir
Hardware Installation Procedure6 An RAID 0 mode and a JBOD mode, as 3 hard disk drives b. For 2 Hard Disk Drives Installed A JBOD mode, s
Hardware Installation Procedure4. Connection Wiring Descriptions and Illustrations: When the mode for Switch has been selected, you can then install
Hardware Installation Procedure8 D. Connect a 1394b cable to the interface of the computer and connect another 1394b cable serially to the rear p
Kommentare zu diesen Handbüchern